2014 Trends at AGAM

During 2014, at AGAM, we were confronted to a large number of creative designs to be fabricated with the AGAM System. Our teams of Industrial Designers and Project Coordinators were able to provide fully engineered solutions to our clients as well as support the fabrication specialists in the plant. We asked the teams what some of their favorite projects were for 2014. Check out what they said!

AGAM’s Aluminum Cladding System

Booth Solutions Using Aluminum Cladding System

Jonathan Knight and Theron Williams worked on a large-scale exhibit at the beginning of 2014 that highlighted AGAM’s Aluminum Cladding System. The Aluminum Cladding System creates a bold and contemporary interior environment, perfect for booths that are trying to stand out in the crowd.

Jonathan and Theron built two structures, within a two-week turnaround. The structure was 16 feet tall by 70 feet wide, including two large conference rooms. This exhibit was significantly larger than typical booths.

2014 Trends at AGAM

AGAM Aluminum Cladding System

Once the structure was drawn, and the customer approved it, Jonathan and Theron specified flat black powder coating that gave the exhibit an architectural and contemporary look.

Possible Customizations with Aluminum Cladding System

The innovative system of interlocking brackets and panels allows for tool-free assembly on a VS45 extrusion frame. AGAM’s state-of-the-art production facility includes the latest manufacturing technologies that fully customize sizes and finishes to your exact specifications.

The Aluminum Cladding System is no different. AGAM has a water jet laser that allows the customizations of the aluminum panels. The laser can cut out graphics, emblems, or logos to take your booth to the next level and make you stand out from your competitors. We understand why Jonathan and Theron chose this project as their favorite for 2014! What are your thoughts?

Specialty End Milling for Customizable Designs

Booth Solutions Using Specialty End Milling

Gabriel Baleanu and Alexandra Hart worked on another large-scale exhibit in 2014. However, they adapted their extrusions for fabric panels using AGAM’s Specialty End Milling. Specialty End Milling results in creating intricate and visually appealing designs.

Gabriel and Alexandra created a 30-foot wide by 40-foot long structure that required a lot of custom work with fabric panel extrusions. The customer wanted fabric panels running along either side of the display as well as on the ceiling. However, there was no easy way to connect the canopy to the larger panels, so they had to use the Specialty End Milling to adapt the extrusion for fabric.

How Does Specialty End Milling Work?

Specialty End Milling is the action by which the end of the extrusion can be milled to different shapes, using various cutting heads. In this case, the extrusion was running the wrong way. So, Gabriel and Alexandra milled off the fin to get it to fit flush against the panel. By milling off the fin, this allowed them to provide support while also giving the impression that the panel was floating.

Gabriel and Alexandra were successful in completely this customized panel after communicating with the client and creating various line drawings before producing the final product.

2014 Trends at AGAM

2014 Trends at AGAM

Drawing and Designing a Back Wall with SEG Fabric

Adaptable Booth Solutions for AGAM Client

Carla Cortbawi and Seth Grove worked on creating a back wall that highlighted the use of SEG fabric in 2014. What made this project standout to them was that the client wanted the wall to be adaptable to different sizes. So, Carla and Seth created a 30-foot wall that could break down into a 20 by 10 and a 10 by 10, allowing for versatility and reusability for their client.

2014 Trends at AGAM

30×10-foot Back Wall with SEG Fabric

2014 Trends at AGAM

20×10-foot Back Wall with SEG Fabric

2014 Trends at AGAM

10×10-foot Back Wall with SEG Fabric

Along with the adaptable back wall, the client wanted monitors to be flush with the fabric. So, Carla and Seth created an inner structure within the wall. The client also wanted access to the monitors, so the team had to fit a door into the SEG fabric to access the monitors from behind, which was something new in 2014.

Client Visit and Collaboration with AGAM

While AGAM teams are in constant communication with the clients, it is sometimes difficult to communicate ideas over the phone. In this case, the client flew down to AGAM’s plant to meet with Carla and Seth to finish ironing out the details. While the client was at AGAM, Carla was able to complete the drawings due to collaboration on the stop. Carla and Seth completed the project within the customer’s specifications. This project was a perfect opportunity to work closely with the client and to strengthen what looks like a promising beneficial and long lasting relationship.

AGAM’s Capabilities All-In-One Project

We’ve highlighted the Aluminum Cladding System, the Specialty End Milling Solutions, and SEG Fabric. But now, we are going to focus on a project that highlights a variety of AGAM’s capabilities.

SEMA Show and AGAM

Adam Frederick and Oscar Sandoval worked with a client who, every year, creates a new design and new theme for the SpeciSEMAalty Equipment Marketing Association (SEMA) show. SEMA is a trade association consisting of a diverse group of manufacturers, distributors, retailers, publishing companies, auto restorers, street-rod builders, re-stylers, car clubs, race teams and more. These individuals buy, sell and use all kinds of specialty parts and accessories to make vehicles more attractive, more unique, more convenient, faster, safer, more fun and even like new again.

Adam and Oscar used AGAM System’s powder coating, SEG fabric, and aluminum to create the client’s display. One of the main focuses was “hiding” the structure using SEG fabric to cover the extrusions.

Client Understood AGAM System

Since the client was familiar with the AGAM System, Adam and Oscar did not have to re-engineer their rendering since they used the AGAM profile to create the exhibit. This 40 by 40 display highlighted AGAM’s FH1490 Extrusion that is used to hold SEG fabric. Another fun fact about this project is that the client’s exhibit design was nominated for best of show, and Adam and Oscar helped make that happen!

AGAM Works to Fulfill All Your Customized Display Needs

At AGAM, we do our best to make the customer’s visions come to life. The AGAM Aluminum Modular Display System is engineered around a broad range of extrusions and accessories. We use these components to build attractive exhibits, displays, store fixtures, office environments or anything your imagination and creativity will allow!

We can’t wait to see what 2015 has in store! If you have a design that you want to see brought to life, contact AGAM today! Email us at info@agam.com or give us a call, toll-free, for more information at 1-800-645-0854.

You May Also Be Interested In

  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: